1. Card Mode 1

  Example Scenario

• Place 52 cards on Inno-Sense.
• Ask a spectator to take away any number of cards from the deck.
• Ask see the bottom card of the packet taken away and remember it and keep the packet.
• If there are more spectators, ask other spectators do same.
• The magician says what cards are and how many cards were taken away.

  How to do

1. Make sure there is nothing on Inno-Sense.
2. Reset the 0 Point using tare.
3. Inno-Sense is “Ready” once you place 52 Cards on it.​
4. Ask a spectator to take away any number of cards from the deck.
5. Inno-Sense detects how many cards were taken away, and what card is at the bottom of the packet taken away.​

2. Card Mode 2

  Example Scenario

• There is nothing on Inno-Sense.
• Spread the deck and ask the spectator to take one card.
• Place the rest of the deck on Inno-Sense.
• The magician says what card the spectator is holding.

  
​  How to do

1. Make sure there is nothing on Inno-Sense.
2. Reset the 0 Point using tare
3. Inno-Sense is “Ready” on zero weight.
4. Place the packet above the chosen card on Inno-Sense.
5. Place rest of deck on Inno-Sense. 
6. Inno-Sense detects how many cards were first placed on itself and calculates what card the audience is holding
   

3. Count Mode 1

  Count Mode works when you have objects that meet the following conditions

• They are countable ( Coins, Marbles, Dice, Buttons, etc. )
• They have the same weight.
• They are heavier than 1 gram

 
  Example Scenario

• Place the total number what you set pieces of objects on Inno-Sense with a bowl(Optional).
• Ask a spectator to take away any number of objects from the table.
• If there are more spectators, ask other spectators do same.
• The magician says how many objects were taken away.

​  How to do

1. Make sure there is nothing on Inno-Sense.
2. Reset the 0 Point using tare.
3. Inno-Sense is “Ready” once you place all the objects on it.​
4. Ask a spectator to take away any number of objects from the deck.
5. Inno-Sense detects how many objects were taken away.

  Caution

• We recommend that the total weight is under 1.2kg including bowl.
• If a spectator push the table while taking objects and total weight goes over 1.5kg, the tare function will be work.
• If you use over 1kg of total weight, we recommend that ask a spectator to follow the sequence below to avoid running tare function.

           1. Take the bowl with all objects.
           2. Take any number of object from the bowl.
           3. Put the bowl with rest objects on the table.​​