The extender is to overcome the limits of normal Bluetooth device.
1. Connection Distance
- Table <-> Extender : 100m
- Extender <-> Watch : 10m
- Please keep the extender in your left pocket of the jacket or the pants if you use watch on left because Bluetooth signal can't through your body.
2. How To Use
- Turn on the power of the table and the extender
- Check that the table and the extender are connected together - which you will be able to tell with the green LED light
- Open the Inno-Sense Application on the phone or the watch.
- Go to "Settings" > "Bluetooth Device"
- Select "IS_EXT"
3. Recharging The Battery Of The Extender
- You can recharge the extender using the Micro USB cable, it will fully charge after 1~2 hours.
- When fully charged, the operating time for the extender is 4 hours.
- The status LED tell you how much battery remained just after power on.
- Green LED blinking 3 times - 75% ~ 100%
- Green LED blinking 2 times - 50% ~ 75%
- Green LED blinking 1 times - 25% ~ 50%
- Red LED blinking 3 times - 0% ~ 25%